Chili Technology offers the ChiliPad Cube, also known because the ChiliPad, a mattress pad featuring a built-in temperature regulation system that provides both heating and customizable.
The pad is constructed with a central control unit known as the Cube, which is connected to a network of silicone microtubes. ChiliPad owners add hot or cold water, which circulates through the tubes before going to the Cube. The temperature can be adjusted manually or with a wireless remote; owners can preset the temperature in one degree increments at any place from 55 to 110 Fahrenheit (13 to 43 Celsius).
The ChiliPad could be obtained in a total of seven storage sizes. Four of these sizes Single, Twin XL, Full, and Split California King are single-zone pads, meaning they have one Cube unit and provide one temperature-regulated surface. The additional three sizes Queen, King, and Master are dual-zone pads, making them a good choice for couples with differing temperature preferences. A Twin-size ChiliPad had previously been available, but eventually discontinued due to low demand.
What You Need to Know About The ChiliPad
- The ChiliPad Cube single- and dual-zone mattress pads are most suitable for:
- Single sleepers and couples who experience temperature-related discomfort (either too hot or too cold) during the night.
- Homeowners would you like to spend on their heating and cooling bills.
- Pregnant as well as other sleepers with medical conditions that creates excessively hot or excessively cold sleeping peacefully.
The ChiliPad Cube may not be suitable for:
- Sleepers that not experience significant temperature-related issues during the night.
- People who awaken easily due to noise.
- Those who find mattress pads beneath their fitted sheets uncomfortable.
How Does the ChiliPad Work?
Follow these five steps to operate the ChiliPad Cube:
Secure the mattress pad
The pad should be unfolded and placed on top of the mattress and underneath a fitted layer. The pad also offers elastic corner straps that suited around the perimeters of the mattress for additional stability. The microtubes could be placed in the head or foot in the bed, primarily based on the owner's preferences.
Connect the tube towards the cube
The Cube should rest on a designated surface with at least two feet (24?) of breathing room on both parties. It should be plugged into an AC outlet, and need to be positioned with the actual tank together with to prevent leakage. Owners can utilize risers location the Cube beneath their bed. Connect the male end of the external tube attachment towards Cube's female connector. When connecting the tube into the Cube, the blue release button should be facing further up.
Fill the cube with water
The Cube has a dent on the very best in which water ought to added. Unscrew the cap and add distilled water as needed. Once the Cube has reached full water capacity, turn the machine on utilizing the power button near the opening. The Cube will produce a light beep, and then the tubes will start fill with water. As water is shipped into the tubes, owners will need to have add more distilled water to the Cube before add water' indicator light goes out side. They should then screw the cap back in place.
Please note: when new, the ChiliPad's water tank should have a trace amount of water inside; this indicates the product has undergone quality control tests ahead of packaging. If ever the water is absent, then the ChiliPad may have been properly ideas.
Adjust temperature
Two buttons one with a flame icon and another with a snowflake icon are normally found next towards power link. Owners use these two buttons boost or reduce the temperature in one-degree increments until their desired setting is gotten to. A temperature reading displays the owner's setting, not the ChiliPad's current ambient temperature. Once the temperature recently been properly adjusted, the number will blink three times. Most temperature changes work within a quarter-hour.
In addition to manual controls, owners can program temperature settings with an invisible remote. To activate the remote, hold down the Cube's power button for five seconds; the unit will beep and show a blinking 888' on temperature display. Turn on the rural at this point; the unit will beep again and display current temperature permanent. To program the remote with a dual-zone pad, make sure one within the Cubes remains off throughout this process.
Power off cube when needed
To go out the Cube, simply press the power button even though is running. The display will immediately turn off, though the fans may run for a few moments much more time. Owners are advised to unplug the Cube when they do not plan employ their ChiliPad in your next 24 hours. To drain the Cube, use an H-shaped tool that along with the ChiliPad; the cross-shaped end is used to drain theCube, and the hollow end is designed to drain the mattress mattress pad.
Please note that dual-zone Chilipads (Queen, King, and California sizes) feature two microtube networks and a Cube styles. To operate these, simply follow the steps mentioned for both sides of the material.
Sizing and Pricing
Current prices for all available ChiliPad sizes are listed inside of table which follows. Please note the pricing differences between pads the actual Cube included and replacement pads
ProductNew (Pad and Cube)Replacement (Pad Only)
Single-size ChiliPad Cube (Single-zone)$499$249
Twin XL-size ChiliPad Cube (Single-zone)$599$289
Full-size ChiliPad Cube (Single-zone)$699$299
Queen-size ChiliPad Cube (Dual-zone)$999$379
King-size ChiliPad Cube (Dual-zone)$1,199$399
California King-size ChiliPad Cube (Dual-zone)$1,199$399
Split California King-size ChiliPad Cube (Single-zone)$649$289
Additionally, customers may purchase replacement Cube units for $399.
ChiliPad Features and Specs
The ChiliPad's features, functions, and product specifications include the following:
Temperature range: The Cube can be programmed in one-degree increments to reach temperatures anywhere from 55 to 110 Fahrenheit (13 to 43 Celsius). Certain factors since bedroom temperature and sleeper weight may affect temperature delivery.
Cube dimensions: The Cube measures 9 1/4 wide, 9 1/4 long, and 7 1/2 tall. It weighs roughly nine pounds.
Energy usage: The average ChiliPad uses 80 watts.
Power sources: The Cube's power cord must be plugged into an AC outlet to utilize. The remote control requires two AAA electrical power.
Cord length: The power cord measures eight feet (8) in time-span.
Material composition: The mattress pad is established from a polyester and cotton incorporate. The microtubes are associated with medical-grade rubber.
ChiliPad weight limit: The information presented operates with as many as 500 pounds per place. However, heavier individuals don't experience food with caffeine . temperature range as lighter individuals.
ChiliPad dimensions: The table below lists width, length, and thickness dimensions for your ChiliPad in each available size.
ChiliPad SizeZonesDimensions (Width x Length x Height)
Single130W x 75L x 3/4H
Twin Extra Long (XL)138W x 80L x 3/4H
Full153W x 75L x 3/4H
Queen260W x 80L x 3/4H
King276W x 80L x 3/4H
California King272W x 84L x 3/4H
Split California King136W x 84L x 3/4H
What's Included with a ChiliPad Purchase?
The items in a ChiliPad box be dependent on whether a single- or dual-zone pad was was sold. A full breakdown is listed in the table a number of.
chilipad review Type of PadNumber of PadsNumber of CubesNumber of RemotesNumber of Drain Keys
Single-zone1111
Dual-zone1211
Additionally, all ChiliPad Cubes come having a user's manual, warranty, and registration card.